|
|
The Latest In Carbide Endmill Designs In A Extensive And Effective Family From Iscar
Manufacturers and die & mold shops can abolish chatter problems in countless milling operations with Iscar's cutting edge Chatterfree carbide endmill. The cutters' variable-pitch flute pattern annihilates harmonic vibration, the foremost source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, customers also report prolonged edge life due to reduced chatter. The chatter-free feature is offered in both solid carbide endmills and tips in Iscar's MULTI-MASTER replaceable-tip line. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for MULTI-MASTER tips. These unique endmills are perfect for lower power machines with ISO40 or BT40 adaptations. The solid carbide construction can handle full slot machining up to 2xD. Depth capability on the replaceable-tip variant is more restrained since the active length is shorter. In full slotting applications on alloy steel, the solid carbide construction effectively handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.
FINISHRED - Revolutionary Solid Carbide Endmills
Iscar is releasing the EFR.. B44 and the MM EFS.. Finishred a innovative solid carbide endmill family. The Finishred carbide endmill is a blending of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more quickly and efficiently than typical endmills. Nonetheless, roughing endmills leave grooves on the machined surface. Consequently, after using a roughing endmill, a finishing endmill needs to be used in order to obtain a flat surface finish. This means time-consuming tool change, setup time and inevitably of maintaining 2 endmill types in the inventory.
Features of the Finishred Endmills:
The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, two serrated flutes and 2 continuous flutes.
The cutting edges of the finishing flutes are radially farther from the tool axis than the cutting edges of the serrated flutes. The finishing flutes remove the grooves caused by the roughing flutes, leaving a fine surface finish.
The tool is fully capable and enables running at rough machining parameters, ending in finish surface quality.
The extraordinary tool design lessens vibration at high load applications.
The tool generates short and long chips simultaneously. This chip mixture is evacuated more readily than each individual chip type, an exceptional solution in slotting and cavity milling applications.
The Finishred is also available with the Multi-Master indexable milling head option which incorporates the Finishred incorporates with the benefit of little setup time, no regrinding costs and the large range of shank and extension choices are available for the Multi-Master milling heads.
A single tool replaces the roughing and finishing endmills; therefore lowering stock.
Tool change and setup time can be discarded.
An extra tool position is acquired on the machine
New Chip Splitting Solid Carbide Endmills for High Metal Removal Rates
ISCAR is announcing the ECP-3/4L family of chip splitting endmills. The brand new endmills are attainable with 3 and 4 38 degree flutes in grade IC900. They feature 2xD and long shanks with downsized neck diameter, which enable machining along high shoulders, at high feeds. These endmills, due to their chip splitting function and force distribution can be used very efficiently on low power machines (CAT40/BT40/ISO40). The serrated cutting edge incorporates flat peaks which leave a better surface finish, in contrast to the current rougher carbide endmill. The ECP endmills are suggested for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the preceding tests conducted at several customers' locations showed superb results.
Iscar Offers A Completely New Line Of Slitting Cutters Applying Tang-Grip Technology And The Strength Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Various Progressions Have Broadened Iscar's Line Of Indexable Endmills For Increased Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
Iscar Adds Their Most Recent Creations To A Extended Line Of Prosperous Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
Push Pull Testing For Railway Industry Supplying Calibrated Measuring Instruments. Stress Load Testing Procedures For On Site Proof To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
New Tools And Carbide Insert Arrangements From Iscar To Better Maximize The Machining Procedure
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.
Commercial Water Heater- Which Is Best For Your Necessities
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.
Brand New Car Manufacturing Jobs To Save The Overall Economy
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.
|
More Articles
Blogroll
|
